Yellow Contact Adhesive Glue For Carpet leather sponge

Methods of application :
1.Open the ventilation facilities or doors and windows to ensure good ventilation in the workshop.

2.Clean the target surface, which needs to be no dust, no oil, no water, and no feculence etc.

3.Use exclusive scrape plate with sawtooth for all purpose adhesive.

4. Pour a certain quantity of adhesive on the target surface.

5. Scrape the adhesive by a scrape plate with sawtooth evenly on the surface. Usually one film of adhesive is

enough. In order to avoid air inside the adhesive film, scrape to one side, do not scrape back and forth.

6. After scrape adhesive on the target surface, air the surface for 5-15 minutes. When the adhesive film is dry,

bond the surfaces with even pressure.

7.When bonding, make sure the position is right at one time to avoid of repositioning, and bond from one end to

another uniformly.

8. After bond, press the bonding area evenly, or hammer it with rubber hammer to push out the air and bond the

surfaces tight to enhance the adhesion quality.